Two Part Structural Adhesive 2115

Our two part structural adhesive 2115 is an acrylic adhesive and part of our structural bonding range. This product is often specified when bonding aluminium (and other metal) joints together in architectural cladding applications. It is also suitable for composites or metal brackets to GRP / FRP composite structures.

2115: 2 (two part adhesive), 1 (acrylic), 15 (15 minutes working time)

Benefits of two part structural adhesive 2115

  • This adhesive is capable of bonding aluminium, steel, engineered plastics and composites together.
  • Two part structural adhesive 2115 has high temperature resistance, tensile and shear performance.
  • Our acrylic range is also capable of filling gaps up to 10mm whilst maintaining the adhesive’s structural strength and characteristics.Two part structural adhesive 2115

Two part structural adhesives technical information

A methyl methacrylate is the methyl ester of methacrylate acid. Its primary use is to manufacture a number of different plastics, but it is also the main ingredient in our range of adhesive products.

Methacrylate adhesives are supplied in a two part system that, when mixed, offer a controlled cure speed suited to the application. The cured adhesive can offer incredibly high tensile, shear and peel strength, whilst also resisting impact loads at both elevated and sub zero temperatures.

The unique chemistry of our two part structural adhesive 2115 is unrivalled in terms of convenience, ease of use and superior mechanical strength. Use for bonding engineered plastics, composites, steel, aluminium and other alloys.

How to apply two part structural adhesive 2115

Our two part structural adhesive 2115 has a 15 minute working life with a 25 minute fixture time. Before dispensing, ensure that surfaces are clean, dry and free of any dirt, dust and grease. For the best results, we recommend using CTA IPA Cleaner Degreaser.

  • Use sufficient pressure over the whole surface at room temperature to ensure maximum adhesion to substrates.
  • The ideal application temperature is between 21 – 40°C.
  • Elevated temperature following application (60°C for 1 hour) improves adhesion wet-out.
  • Primers can increase the bond performance and surface tension. We recommend CTA Primer or CTA UV Identifiable Primer to achieve the best results.
  • Ensure uniform stress distribution.

For more information, read our two part adhesives FAQs and guide to surface preparation for adhesives and best working practice.

Purchasing information

Our two part structural adhesive 2115 is available in neutral and black, 50ml and 400ml, for use with manual or pneumatic applicator guns and nozzles. If a larger volume is required, we are able to supply 20 litre pails and 200 litre drums, which also require bulk dispensing units. Trial kits are also available for this product. For more information, please contact us. All prices are inclusive of VAT.

If you have any questions, don’t hesitate to contact us via the yellow chatbox, fill out our online contact form, email us at or call us directly on +44 (0) 121 378 2909.