Pipe thread sealant dripstop 940

Pipe thread sealant dripstop 940 is a high-speed thread sealant for use on inactive metals such as stainless steel and aluminium used in chemical process piping. Dripstop 940 is formulated to cure without the necessity of a primer. Dripstop 940 has been shown to be compatible for use within diesel exhaust systems using DEF according to Continue reading

Tamper Proof 610

Tamper Proof 610 is a water-based masking product designed for tamper proofing applications. Hernon Tamper Proof 610 can be applied with a brush or dispensing equipment, dries quickly at room temperature to a very flexible coating, dark blue in colour.  Can be applied to oily surfaces which eliminates the need for cleaning prior to application. Continue reading

Extreme weather and temperature resistant silicone

Extreme weather and temperature resistant silicone 336  is a high performance, single component silastomer, ready to use adhesive sealant.  It has a paste-like consistency, which cures to a tough, resilient and durable silicone rubber when exposed to moisture in the air.  Since it will not flow of its own weight, silastomer 336 can be applied Continue reading

High strength thread paste 432

High strength thread paste 432  is a brand new innovative technology.  432 is a is thixotropic, and has excellent high temperature characteristics.   After being stored 24 hours at 200 deg C, when tested at 200 degrees C, it has prevailing torque of 200 inch lbs.The thixotropic paste consistency stays put on the threads, and does Continue reading

Thread lockers

Thread Lockers, sometimes called thread locking fluid, bolt locker, stud lock or in our case Nuts N’ Bolts are single component adhesives that cure in the absence of air (anaerobic). Our full range of Hernon Thread lockers are shown below. If you have a thread then we have the adhesive to suit. Most of the Continue reading

Extreme weather and temperature resistant Silastomer 337

Extreme weather and temperature resistant Silastomer 337 is a high performance, single component, ready to use clear adhesive sealant. Silastomer 337 cures to a tough, resilient and durable silicone rubber once exposed to moisture in the air.  The neutral curing system of this extreme weather and temperature adhesive is designed to be used around sensitive electronics Continue reading

Fusionbond 377

Fusionbond 377 is the strongest structural adhesive ever made! A two component methacrylate adhesive.  Specially formulated for structural bonding of thermoplastics, metal, wood and composite assemblies.  New Fusionbond 377 is an excellent choice for composite bonding applications in the marine, automotive and construction industries because it requires virtually no surface preparation.  Fusionbond 377 provides superior Continue reading

Oxygen system pipe sealant 950

Hernon Dripstop 950 is a pipe joint & thread sealant that is highly recommended where oxygen, aggressive chemicals, such as chlorine or powerful oxidisers, are present. It is a high density inert thread sealant and lubricant, specially formulated for severe high pressure applications. Oxygen system pipe sealant 950 is odourless, non corrosive and hydrophobic.  It Continue reading

Encapsulant potting compound LED 67011

Our Encapsulant is perfect for LED bonding, electrical and instrument potting components such as water meters and small electric motors. Encapsulant potting compound LED 67011 is a two component, room temperature curing adhesive system.  Hernon Tuffbond 67011 sealant is a two component, 100% solid system, two to one ratio, room temperature cure system and is Continue reading

Non flammable activator 75

Hernon® EF Accelerator is a low toxicity, non flammable, non combustible, non ozone depleting, low volatile organic compound (VOC).  It is an accelerator, which improves instant adhesive fixture and curing performance.  Non flammable activator 75 is Eco friendly.  Through careful, meticulous Research and Development, our expert team of engineers, programmers, chemists and chemical engineers eliminate Continue reading

Copper anti-seize 367

Copper anti-seize 367 is a low-friction, anti-seize lubricant manufactured from a combination of micro-size copper flakes and graphite dispersed in a water-resistant grease and fortified with antioxidants, plus rust and corrosion inhibitors. Hernon Copper anti-seize fills irregularities and imperfections and resists welding, hardening, and setting. It provides low-friction and cushions impact and shock loads. Low shear Continue reading

Rust eliminator 32

Rust Eliminator 32 is used on rusted steel when only a minimum surface preparation is practical. Rust Eliminator 32 stops rust, coats surface, and acts as a primer for various covering paints on: Duct work, overhead cranes and booms Municipal and highway sign posts Conveyors, supports, guard rails, fences Power plants, heating and cooling plants Continue reading

Strongest structural adhesive

Strongest structural adhesive, that’s quite a claim isn’t it!  See for yourself… Strongest structural adhesive available today, Fusionbond 372 is an outstanding choice for OEM and automotive manufacturers.  New and improved version now available.  Fusionbond 372 is a highly thixotropic, two component, room temperature curing, 1:1 ratio, methacrylate adhesive system, formulated to provide fixture strength Continue reading