MS Polymer High Grab Adhesive 15500

MS Polymer High Grab Adhesive 15500 * is a clear, all-round durable, flexible adhesive and sealant based on MS Polymer technology providing excellent adhesion to non-porous surfaces and is paintable with most paints. Can be applied on damp surfaces. Tested and approved in accordance with EC Regulation No 1935/ 2004 for materials intended to come into contact with
food. This product is odourless, neutral and free of isocyanates. Conforms to ISO 11.600 F25 HM.

* MS or Modified Silastomer

Colours : Clear

Sizes : 290ml

Pack Sizes : 12 per Box

MS Polymer High Grab Adhesive 15500 Applications

Suitable for sealing joints around sanitary fixtures, weatherproofing joints around windows and doors, glazing systems, joints and assemblies in coach body work. For gluing panels, skirting boards, windows, thresholds, mirrors and insulation materials. Will seal and bond glass, porcelain, coated metal, epoxy and polyester panels, polystyrene, UPVC, stainless steel, anodised aluminium and finished wood. On porous surfaces such as concrete a primer is recommended. Can also be used as a universal filler for cracks and uneven surfaces.

Suitable for sealing joints around sanitary fixtures, weatherproofing joints around windows and doors, glazing
systems, joints and assemblies in coach body work. For gluing panels, skirting boards, windows, thresholds,
mirrors and insulation materials. Will seal and bond glass, porcelain, coated metal, epoxy and polyester panels,
polystyrene, UPVC, stainless steel, anodised aluminium and finished wood. Can also be used as a universal
filler for cracks and uneven surfaces. May be used safely in the foodstuff-related sector. For example the
grouting of wall and floor areas in companies which are preparing and processing foodstuffs. The solid colours
have excellent anti pick qualities and therefore make this product suitable for use in correctional institutions and areas where vandalism of the sealant may occur.

MS Polymer High Grab Adhesive 15500 Instructions

Cut the cartridge seal and screw on the nozzle which should be cut to your required size. Using a skeleton gun, apply the sealant into the gap or joint to provide a good solid fill. If required place masking tape along edges, removing within 10 minutes of application. For gluing applications, apply adhesive in vertical lines at a distance of 30cm. Support the application for 24 hours until full curing of MS Polymer High Grab Adhesive 15500.

Contact our team of experts today for more information

 

 

Order MS Polymer High Grab Adhesive 15500 1 box of 12 x 290ml @ £96.77