Description
Cyanoacrylate 1113 is a high viscosity, low odour Methoxyethyl Cyanoacrylate adhesive. A low bloom product specially formulated for cosmetically critical applications to eliminate whitening/chlorosis of bonded joints (also known as blooming). The low odour characteristic improves user comfort. Formulated for general purpose bonding of most plastics, rubbers and other common substrates. CTA 1113 has good gap filling capability.
Cure Speed: 20-60 seconds
Viscosity: 1200-1500cps
Gap Fill: 0.20mm
Available in 50ml and 500ml bottles.
Benefits of Cyanoacrylate 1113 HV Low Bloom Super Glue
- Suitable for bonding a very wide range of materials, including some porous ones, where fast bonding is required.
- Designed to eliminate whitening on bonded joints.
- Good gap fill capability.
Application examples of Cyanoacrylate 1113 HV Low Bloom Super Glue
- Bonding acrylic or polycarbonate displays, lenses, or covers.
- Bonding flexible rubber gaskets, seals, or vibration dampers to metal or composite housings.
- Securing wires, small connectors, or components in circuit assemblies or cable harnesses.
- Bonding plastic casings for devices like earphones, phone accessories, or wearable gadgets.
- Bonding decorative trims, emblems, or rubber seals in automotive interior assembly.
How to apply Cyanoacrylate 1113 HV Low Bloom Super Glue
Cyanoacrylate 1113 HV Low Bloom Super Glue is normally hand applied from the bottle. Apply sparingly to one surface and press parts firmly together until handling strength is achieved. As a general rule, as little adhesive as possible should be used – over application will result in slow cure speed and lower bond strength. Store in a cool area out of direct sunlight. Refrigeration to 5°C gives optimum storage stability.
Before dispensing, ensure that surfaces are clean, dry and free of any dirt, dust and grease. For the best results, we recommend using CTA IPA Cleaner Degreaser. For difficult to bond surfaces or where there are gaps or porous surfaces, CTA activators may be required.
The ideal application temperature is between 15 – 25°C.
Ensure uniform stress distribution.
Activator 1150
Activator 1150 is recommended when a faster cure speed is required or when bonding in extreme conditions. Can reduce the cure time by 10 seconds. Also, reduces cyanoacrylate bloom. This activator is DMPT-free.
Available in 200ml aerosol cans.
See more information Cyanoacrylate Activator 1150
Purchasing information
Cyanoacrylate 1113 HV Low Bloom Super Glue is available in 50ml and 500ml. For more information, please contact us. All prices are inclusive of VAT.
If you have any questions, don’t hesitate to contact us via the yellow chatbox, fill out our online contact form, email us at [email protected] or call us directly on +44 (0) 121 378 2909.
