Pre powder coat seam sealer 15002

Pre powder coat seam sealer 15002 is an improved version of our CTA 15000 which is now obsolete.  Pre powder coat seam sealer 15002 is a unique formulation of a technologically advanced adhesive system developed to aid the paint and powder coat industry.  CTA 15002 enables our customer to fill gaps and seal seams in metal panels prior to being put through an oven bake cycle.  This enables metal fabricators to spot weld stainless steel panels and then fill the gaps, thus reducing welding time and speeding up production and process time.  When cured in the oven it becomes very strong and over-paintable.

CTA 15002 Heat cured adhesive is a one part product.  Curing and the development of adhesion are not achieved until the material is heated above 130°C.  This newly developed formulation cures more quickly at temperatures as low as 90°C, at these temperatures, the adhesives will generally cure in about an hour.  Higher temperatures will result in a faster cure.  Limitations on cure speed are generally dependent on the temperatures that the unit and components are able to withstand.  Heat curing can be done in a batch or conveyor oven.  Heat cured adhesives will cure in either thin or thick section and can cure when confined.  View our latest case study.

Pre powder coat seam sealer is a single part adhesive packaged in a familiar 310ml cartridge and is also available in bulk sizes.  It has been specifically formulated with a unique blend of adhesives similar to epoxy resins.

  • Size: – 310ml and bulk
  • Curing time: – 30 minutes at 130°C
  • Colour: – Black
  • Viscosity: – Paste
  • Hardness: – +80

How to apply pre-powder coat seam sealer 15002

Pre powder coat seam sealer is often used by paint and powder coat companies when preparing aluminium panels for the Automotive, Construction and Manufacturing industry.  Car and Bus panels can be bonded together with our adhesive quicker than traditional methods.  Also stainless steel stiffeners can confidently be bonded to panels prior to paint cycles within the Cladding and Commercial Facade industry.  When industrial manufacturing companies need to fill a gap or seal a joint between to metal parts, then this high viscosity (paste like) adhesive is ideal.

If you are enquiring about our pre powder coat range of products and you are outside the UK, you may be interested to know we have a couple of distributors MJB Welding Supply, based in Chico, California USA and Silver Back Equipment based in South Africa. Central Tapes & Adhesives have a comprehensive range of adhesives, automotive sealants and seam sealers readily available to the automotive and construction industry when needing to bond stainless steel and aluminium.

View our latest case study on our 15002 pre powder coat seam sealer

Check out our High temperature film tape 3150 with a thermostable adhesive system +180°C

For more information on our pre powder coat seam sealer contact our technical team today

Price shown below is the price you pay inclusive of VAT

Order pre powder coat seam sealer 15002 15002 Sealer 12 x 310ml @ £158.40