Craft and model making adhesive

Craft and model making adhesive from CTA is a high viscosity cyanoacrylate.  CTA’s Craft and model making adhesive is a premium super glue, fast curing, high viscosity modified Ethyl Cyanoacrylate adhesive.  It is suitable for the bonding of a very wide range of materials, including acidic surfaces and some porous ones.  Formulated for the bonding of plastics, rubbers, paper, leather, metals, wood and other common substrates.  Making CTA’s Craft and model making adhesive an ideal choice for use in all kinds of crafts and model making.  Recommended for use on assemblies where parts are not close fitting (an ideal gap filler), surfaces that are rough or when time is required to align parts before cure.

The fixture time of our Craft and model making adhesive is 20 to 60 seconds.  The cure speed varies with the substrates to be bonded. Acidic surfaces such as leather and paper have longer cure times than most plastics and rubbers.  Metal will cure in <60 seconds, plastic will cure in <40 seconds and rubber will cure in <30 seconds.Craft and model making adhesive

Available in a handy 20ml bottle with a user friendly pin top lid to ensure no clogging of adhesive hole.

For more information on our Craft & model making adhesive please contact us.


Cyanoacrylate 1160 Bonding Kits (Mitre Mate)

Cyanoacrylate-1160-Bonding-Kits-(Mitre Mate).Cyanoacrylate 1160 Bonding Kits (Mitre Mate); a high viscosity modified Ethyl Cyanoacrylate adhesive combined with as a spray activator to achieve an instant bond.

Sizes: 50g adhesive bottle and 200ml can

Voscosity: 1500 cps

Speed: 3 seconds @ 20°C

Cyanoacrylate 1160 Bonding Kits (Mitre Mate) application

1160 Bonding Kit allows users to enjoy the fast curing and high bond strengths of cyanoacrylates on surfaces that would normally be unsuitable for these adhesives. Examples are porous surfaces and acidic surfaces. The activator is primarily designed for fast cure of the adhesive or for post curing outside the bond line. The system is particularly useful for preventing the low viscosity adhesive being absorbed into porous surfaces.

  • Carpentry
  • MDF and other woods

Cyanoacrylate 1160 Bonding Kits (Mitre Mate) preparation

Cyanoacrylate 1160 Bonding Kits (Mitre Mate) is normally hand applied from the bottle. Apply sparingly to one surface and press parts firmly together until handling strength is achieved. As a general rule, as little adhesive as possible should be used – over application will result in slow cure speed and lower bond strength. Store in a cool area out of direct sunlight. Refrigeration to 5°C gives optimum storage stability.


Cyanoacrylate Gel 1154 super glue

Cyanoacrylate Gel 1154 super glue is a fast curing Very High viscosity Ethyl Cyanoacrylate adhesive.  It is suitable for bonding a very wide range of materials, including some porous ones and surface insensitive substrates, where a fast bond is required, Speed; 60 seconds at 20°C.   Cyanoacrylate Gel 1154 is formulated to provide a high tensile and shear strength.

Standard size available to purchase online:

10 x 20g (1 Box)

Contact us to discuss variations on size or to speak with our technical team to discuss your application.

 

Cyanoacrylate Gel 1154 super glue

Cyanoacrylate Gel 1154 super glue application

Cyanoacrylate Gel 1154 super glue is used in a huge cross section of industrial applications. From OEM to MRO industries, this grade can be used on a variety of plastic, rubber and metal bonding applications including automotive, white goods and furniture manufacturing. Typical bonding examples shown below.

  • Automotive Trim / Components
  • Rubber leather and fabrics
  • Plastic Components
  • Metal part
  • White goods

Cyanoacrylate Gel 1154 super glue preparation

For difficult to bond surfaces or where there are gaps or porous surfaces, CTA activators may be required. Ensure parts are clean, dry and free from oil and grease.

CTA 1154 super glue is normally hand applied from the bottle. Apply sparingly to one surface and press parts firmly together until handling strength is achieved. As a general rule, as little adhesive as possible should be used – over application will result in slow cure speed and lower bond strength. Store in a cool area out of direct sunlight. Refrigeration to 5°C gives optimum storage stability.

Price shown is the price you pay (inclusive of VAT)


Cyanoacrylate 1135 black rubber toughened super glue

Cyanoacrylate 1135 black rubber toughened super glue is a fast curing black rubber toughened, high viscosity Ethyl Cyanoacrylate adhesive. Formulated to provide high peel strength and shock resistance. Speed: 25 seconds at 20°C, viscosity: 5000cps.  It is suitable for the bonding of a very wide range of materials.

Standard size available to purchase online:

Cyanoacrylate 1135 black rubber toughened super glue

50ml x 10 (1 Box)

Contact us for other sizes and formulations available or to discuss your application needs with our technical team.

Cyanoacrylate 1135 black rubber toughened super glue application

1135 is used in a huge cross section of industrial applications. From OEM to MRO industries, this grade can be used on a variety of plastic, rubber and metal bonding applications including automotive. Typical bonding examples shown below.

  • EPDM, O rings
  • Rubber leather and fabrics
  • Centre consoles, dashboards and weather striping

Cyanoacrylate 1135 black rubber toughened super glue preparation

For difficult to bond surfaces or where there are gaps or porous surfaces, CTA activators may be required. Ensure parts are clean, dry and free from oil and grease.

Cyanoacrylate 1135 black rubber toughened super glue is normally hand applied from the bottle. Apply sparingly to one surface and press parts firmly together until handling strength is achieved. As a general rule, as little adhesive as possible should be used – over application will result in slow cure speed and lower bond strength. Store in a cool area out of direct sunlight. Refrigeration to 5°C gives optimum storage stability.

Price shown is the price you pay (inclusive of VAT)


Cyanoacrylate 1115 HV super glue

Cyanoacrylate-super-glue-1115hv.

Cyanoacrylate 1115 HV super glue is a fast curing High viscosity Ethyl Cyanoacrylate adhesive. It is suitable for bonding a very wide range of materials, including some porous ones, where fast bonding is required.  Cyanoacrylate 1115 HV super glue is normally hand applied from the bottle.  Apply sparingly to one surface and press parts firmly together until handling strength is achieved.  As a general rule, as little adhesive as possible should be used as over application will result in slow cure speed and lower bond strength.   Speed, 20 seconds at 20°C, Viscosity, 1500cps.  Formulated to provide high tensile and shear strength.

Standard size of 50ml available to purchase on line in boxes of 10

If you require further details on our super glue or would like prices on different sizes, please contact us

 

Cyanoacrylate 1115 HV super glue application

Cyanoacrylate 1115 HV super glue is used in a huge cross section of industrial applications. From OEM to MRO industries, this grade can be used on a variety of plastic, rubber and metal bonding applications including automotive, white goods and furniture manufacturing. Typical bonding examples are rubber leather and fabrics, plastic components, metal clips, identification tags to equipment, white goods.

For difficult to bond surfaces or where there are gaps or porous surfaces, CTA activators may be required.  Ensure parts are clean, dry and free from oil and grease.

Store in a cool area out of direct sunlight.  Refrigeration to 5°C gives optimum storage stability.

Price shown is the price your pay (inclusive of VAT)


Cyanoacrylate 1110 MV super glue

Cyanoactrylate 1110 MV super gluis a fast curing advanced surface insensitive medium viscosity Ethyl Cyanoacrylate adhesive. It is suitable for the bonding of a very wide range of materials, including  some porous ones, where rapid bonding is required.

Available in various sizes and other formats, please contact us for further details.

Voscosity: 100cps

Speed: 10 seconds @ 20°C

Cyanoacrylate 1110 MV super glue application

CTA 1110 MV is used in a huge cross section of industrial applications. From OEM to MRO industries, this grade can be used on a variety of plastic, rubber and metal bonding applications including automotive, white goods and furniture manufacturing. Typical bonding examples shown below.

  • EPDM Seals
  • UPVC
  • Models
  • Rubber leather and fabrics
  • Centre consoles, dashboards and weather striping
  • Identification tags to equipment

Cyanoacrylate 1110 MV super glue preparation

For difficult to bond surfaces or where there are gaps or porous surfaces, CTA activators may be required. Ensure parts are clean, dry and free from oil and grease.

Cyanoacrylate 1110 MV super glue is normally hand applied from the bottle. Apply sparingly to one surface and press parts firmly together until handling strength is achieved. As a general rule, as little adhesive as possible should be used – over application will result in slow cure speed and lower bond strength. Store in a cool area out of direct sunlight. Refrigeration to 5°C gives optimum storage stability.


Cyanoacrylate 1106 PR super glue

Cyanoacrylate 1106 RP super glue is a fast curing advanced surface insensitive Ethyl Cyanoacrylate adhesive. It is suitable for the bonding of a very wide range of materials, including acidic surfaces and some porous ones, where rapid bonding is required.

Various sizes and other formats available contact us for further details

Voscosity: 20cps

Speed: 5 seconds @ 20°C

Cyanoacrylate 1106 PR super glue applications

1106 LV is used in a huge cross section of industrial applications. From OEM to MRO industries, this grade can be used on a variety of plastic, rubber and metal bonding applications including automotive, white goods and furniture manufacturing. Typical bonding examples shown below.

  • O rings
  • Magnets
  • Rubber leather and fabrics
  • Centre consoles, dashboards and weather striping
  • Identification tags to equipment

Cyanoacrylate 1106 PR super glue preparation

For difficult to bond surfaces or where there are gaps or porous surfaces, CTA activators may be required. Ensure parts are clean, dry and free from oil and grease.

Cyanoacrylate (super glue) 1106 PR is normally hand applied from the bottle. Apply sparingly to one surface and press parts firmly together until handling strength is achieved. As a general rule, as little adhesive as possible should be used – over application will result in slow cure speed and lower bond strength. Store in a cool area out of direct sunlight. Refrigeration to 5°C gives optimum storage stability.


Cyanoacrylate 1105 LV super glue

Cyanoacrylate 1105 LV super glue is a fast curing, low viscosity modified Ethyl Cyanoacrylate adhesive. It is suitable for the bonding of a very wide range of materials. Specified where rapid bonding is required, speed: 8 seconds at 20°C.  Viscosity: 120cps.

Standard size available to purchase online:

Cyanoacrylate 1105 LV super glue

50ml x 10 (1 Box)

Contact us to discuss variations in sizes also or to speak with our technical team to discuss your application.

 

Cyanoacrylate 1105 LV super glue application

1105 LV is used in a huge cross section of industrial applications. From OEM to MRO industries, this grade can be used on a variety of plastic, rubber and metal bonding applications including automotive, white goods and furniture manufacturing. Typical bonding examples shown below.

  • Rubber leather and fabrics
  • Centre consoles, dashboards and weather striping
  • Identification tags to equipment

Cyanoacrylate 1105 LV super glue LV preparation

For difficult to bond surfaces or where there are gaps or porous surfaces, CTA activators may be required. Ensure parts are clean, dry and free from oil and grease.

Cyanoacrylate 1105 LV super glue is normally hand applied from the bottle. Apply sparingly to one surface and press parts firmly together until handling strength is achieved. As a general rule, as little adhesive as possible should be used – over application will result in slow cure speed and lower bond strength. Store in a cool area out of direct sunlight. Refrigeration to 5°C gives optimum storage stability

Price shown is the price you pay (inclusive of VAT)