Cyanoactrylate 1110 MV super glue is a fast curing advanced surface insensitive medium viscosity Ethyl Cyanoacrylate adhesive. It is suitable for the bonding of a very wide range of materials, including some porous ones, where rapid bonding is required.
Available in various sizes and other formats, please contact us for further details.
Speed: 10 seconds @ 20°C
Cyanoacrylate 1110 MV super glue application
CTA 1110 MV is used in a huge cross section of industrial applications. From OEM to MRO industries, this grade can be used on a variety of plastic, rubber and metal bonding applications including automotive, white goods and furniture manufacturing. Typical bonding examples shown below.
- EPDM Seals
- Rubber leather and fabrics
- Centre consoles, dashboards and weather striping
- Identification tags to equipment
Cyanoacrylate 1110 MV super glue preparation
For difficult to bond surfaces or where there are gaps or porous surfaces, CTA activators may be required. Ensure parts are clean, dry and free from oil and grease.
Cyanoacrylate 1110 MV super glue is normally hand applied from the bottle. Apply sparingly to one surface and press parts firmly together until handling strength is achieved. As a general rule, as little adhesive as possible should be used – over application will result in slow cure speed and lower bond strength. Store in a cool area out of direct sunlight. Refrigeration to 5°C gives optimum storage stability.