Description
Locker Retainers – Anaerobic adhesives
Locker Retainers are high-performance anaerobic retaining compounds specifically designed for bonding cylindrical components, including bearings, gears, shafts, and pulleys.
These compounds are particularly effective in:
- Reducing assembly stresses,
- Preventing corrosion
- Mitigating loosening caused by vibration or shock.
Retaining liquids offer a cost-effective and time-efficient solution for assembly processes.
Anaerobic retaining compounds are clean and easy to use, curing directly within the joint. They provide protection against corrosion, leakage, and loosening due to vibration, shock, and thermal expansion.
Additionally, most of these products are fluorescent under UV light, facilitating identification.
Locker Retainers also known as Anaerobic adhesives
1603 Retainer (Green – Medium to High strength)
A green retaining compound providing a permanent bond. Ideal for filling small gaps.
1604 Retainer (Green – High Temperature – Medium to High Strength)
A green retaining compound with high viscosity and high temperature resistance.
1231 Retainer (Green – Oil Tolerant – Ultimate Strength)
A green retaining compound with high viscosity and oil tolerance.
1232 Retainer (Yellow – Medium Strength)
A yellow medium strength, medium viscosity retaining compound. Ideal for bearing fit applications.
1229 Retainer (Green – High temperature – High Strength)
A green, high strength, low viscosity and high temperature resistant retaining compound. Ideal for clearance or press fit applications.
Typical Applications for Locker Retainers:
Assembly application information:
Slip-Fitted parts:
If assembling slip-fitted parts, apply adhesive around the leading edge of the pin and inside the collar, rotating throughout assembly to ensure good coverage.
Press-Fitted parts:
These parts must have adhesive applied thoroughly to both mating surfaces and assembled at high pressure.
Please see the Locker Retainer comparison chart below:
Product | UV Positive | Viscosity Range (cP) | Shear Strength (N/mm2 ) | Gap Fill (mm) | Service Temp (°C) | Fixture Time |
---|---|---|---|---|---|---|
1603 Retainer (Green – Medium to High strength) | Yes | 100-150 | >15 | <0.1 | -54 to 150 | <10min / 24hr |
1604 Retainer (Green – High Temperature – Medium to High Strength) | No | 5000 – 12000 Thixotropic | >17 | 0.25 | -54 to 230 | <30min / 24hr |
1231 Retainer (Green – Oil Tolerant – Ultimate Strength) | Yes | 2000 – 3000 | >25 | 0.15 | -54 to 180 | <15min / 24hr |
1232 Retainer (Yellow – Medium Strength) | Yes | 400 – 800 | >7 | 0.15 | -54 to 150 | <15min / 24hr |
1229 Retainer (Green – High temperature – High Strength) | Yes | 400 – 600 | >25 | 0.15 | -54 to 180 | <5min / 24hr |