Our PU-based crusher backing compounds have been designed to provide high performance and reliability, even in the most demanding environments. They can be easily applied and provide maximum protection against impact and vibration. CTA crusher backing has been formulated to be suitable for all types of cone crushers.
Working Time: 20 minutes (at 20°C)
Fixture Time: 6 hours (at 20°C)
Temperature and timings represent a guide only. Actual timings will differ dependent on actual temperature and humidity at time of use.
Crusher backing is used within the quarry and mining industry to protect the life span of wear parts within the crushers. The main purpose of our CTA Crusher Backing is to absorb the impact and reduce the vibration created by the crushers when in use. This product can be used within the following industries:
Quarrying, Mining, Recycling and waste processing, Cement & Concrete Manufacturers, Construction and Aggregate producers.
CTA Crusher Backing is available in 10kg kits. Part A is in a Metal pail (8.33kg) and Part B is in a metal can (1.67kg). To purchase a couple of kits or a full pallet of 80 kits please contact us.
Benefits of crusher backing
- None Hazardous for transportation.
- Variable working time 5-50mins (dependent on temperature)
- Release agents are also available to accompany our crusher backing products, to ensure clean and easy removal when servicing and completing replacement.
- This product has very good compressive and flexural strength, with minimal shrinkage.
- Crusher backing compounds for cone crushers provide ultimate impact protection and extend tool life.
- This is a low-viscosity product, allowing easy mixing and pour-ability.
Product information
Using polyurethane-based technology, we have reduced health and safety issues and transportation costs, compared to epoxy-based products (CTA Crusher Backing is a non-flammable product). The mix ratio is 8.33 : 1.67 (by weight). This product is neatly packaged in a 10kg kit, Both parts are in metal containers.
CTA Industrial also offer many other adhesive products. You may also be interested in our range of Threadlockers, Retainers or Structural Adhesives.
How to apply crusher backing
- The ideal application temperature is between 15-25°C.
For more information, read our two part adhesives FAQs and guide to surface preparation for adhesives and best working practice.
Purchasing information
This product is available in 10kg kits. For more information, please contact us. All prices are inclusive of VAT.
If you have any questions, don’t hesitate to contact us via the yellow chatbox, fill out our online contact form, email us at [email protected] or call us directly on +44 (0) 121 378 2909.