Description
Locker Retainers – Anaerobic adhesives
Locker Retainers are high-performance anaerobic retaining compounds specifically designed for bonding cylindrical components, including bearings, gears, shafts, and pulleys.
These compounds are particularly effective in:
- Reducing assembly stresses
- Preventing corrosion
- Mitigating loosening caused by vibration or shock
Retaining liquids offer a cost-effective and time-efficient solution for assembly processes.
Anaerobic retaining compounds are clean and easy to use, curing directly within the joint. They provide protection against corrosion, leakage, and loosening due to vibration, shock, and thermal expansion.
Additionally, most of these products are fluorescent under UV light, facilitating identification.
Locker Retainers also known as Anaerobic adhesives
1229 Retainer (Green – High Strength)
A high-strength, low-viscosity retaining compound formulated to bond tightly fitted metal surfaces with maximum structural strength. Ideal for applications where any movement of adhesive outside the joint must be avoided. Designed for bonding cylindrical fitting components, providing a reliable bond under all levels of cyclic load stress distribution.
1231 Retainer (Green – Ultra High Strength)
An ultra high-strength, medium-viscosity retaining compound developed to bond closely fitted metal surfaces with maximum structural strength. Specifically intended for securing cylindrical fitting components and delivers a dependable bond under all levels of cyclic load stress distribution. Formulated for permanent assembly and is not recommended for parts that may need to be dismantled for maintenance or strip-down purposes.
1232 Retainer (Yellow – High Strength)
A high-strength, medium-viscosity retaining compound formulated to bond tightly fitted metal surfaces while providing medium structural strength. Specifically designed for securing cylindrical fitting components and ensures a consistent bond under all levels of cyclic load stress distribution.
1603 Retainer (Green – High strength – Low viscosity)
A high-strength, low-viscosity retaining compound developed to bond closely fitted metal surfaces with maximum structural strength. Specifically intended for cylindrical fitting components and maintains a reliable bond under all levels of cyclic load stress distribution, even at elevated temperatures.
1604 Retainer (Green – High Temperature – High Strength)
A high-strength, high-temperature retaining compound, formulated to bond closely fitted metal surfaces with maximum structural strength. Specifically designed for cylindrical fitting components and provides a dependable bond under all levels of cyclic load stress distribution. Contains added adhesion promoters, delivering excellent performance on aluminium, plated metals, stainless steel, and hybrid alloy parts.
1615 Retainer (Silver – High Strength – High Viscosity)
A high-strength, high-viscosity retaining compound developed to bond tightly fitted metal surfaces with maximum structural strength. Specifically formulated for securing cylindrical fitting components and delivers a dependable bond under all levels of cyclic load stress distribution.
Typical Applications for Locker Retainers:
Assembly application information for Locker Retainers – Anaerobic adhesives:
Slip-Fitted parts:
If assembling slip-fitted parts, apply adhesive around the leading edge of the pin and inside the collar, rotating throughout assembly to ensure good coverage.
Press-Fitted parts:
These parts must have adhesive applied thoroughly to both mating surfaces and assembled at high pressure.
Please see the Locker Retainer comparison chart below:
| Product | Colour | Strength | Viscosity Range (cP) | Breakaway Torque (Nm) | Gap Fill (mm) | Service Temp (°C) | Fixture Time |
|---|---|---|---|---|---|---|---|
| 1229 Retainer | Green | High | 100-150cps | 25 Nm | 0.15mm | -51°C to +148°C | <10min / 24hr |
| 1231 Retainer | Green | Ultra High | 2000-4000cps | 30 Nm | 0.25mm | -50°C to +150C | <10min / 24hr |
| 1232 Retainer | Yellow | High | 400-800cps | 26 Nm | TBC | -51°C to +148°C | <30min / 24hr |
| 1603 Retainer | Green | High | 100-150cps | 10-20 Nm | 0.1mm | -51°C to +150°C | <10min / 24hr |
| 1604 Retainer, High Temperature | Green | High | 5000 to 12000cps | 23 Nm | TBC | -51°C to +177°C | <15min / 24hr |
| 1615 Retainer | Silver | High | 50000-100000cps | 35 Nm | 0.38mm | -51°C to +120°C | <10min / 24hr |
Other variations available upon request. Please contact us with your specific requirements.
You may also be interested in our range of Threadlockers – Anaerobic adhesives. Please follow the link to find out more.
If you have any questions, don’t hesitate to contact us via the yellow chatbox, fill out our online contact form, email us at [email protected] or call us directly on +44 (0) 121 378 2909.
